film processor

PROCESSORS FOR X-RAY FILMS

Processors are developed to increase the efficiency and quality of X-ray film development process.

All processors available in the catalogue are equipped with following systems:
- system of bath concentrations control and system of permanent bath agitation
- system of automatic bath replenishment
- system to maintain the constant temperature of the baths
- energy saving system

All processors available in the catalogue could be used for the development of X-ray films of any producers, using chemical reagents of any producers for the automatic development. There is a possibility to process only X-ray films, designed for the automatic development.

COLENTA INDX 900E

Super-compact desktop processor designed for all types of X-ray films. The film goes out towards the feed tray. The machine could be installed in the corner of the room. It is ideally suitable for the mobile laboratory and small rooms.

Types and sizes of films to be processed — sheet and roll films of all standard sizes up to 36 cm wide.

Maximum capacity:

Film size	Cycle 2,7 min. sheets/hour
35 х 43 cm	50
18 x 43 cm	106
11,4 x 43 cm	159
8,9 x 25 cm	270
1000 cm	60 (76cm/min)
3000 cm	20 (76cm/min)

Overall dimensions:
• Width—64 cm, Height —52 cm, Length—91 cm
• Weight without baths—58 kg
• Occupied area—0,5 m2

Power demand — 200-240 V, 50/60 Hz, 14 A

» Details

COLENTA INDX 37/2MW, 43/2MW

High-capacity desktop/floor processor designed for all types of X-ray films. Changeable direction for the outgoing of developed film. The machine could be installed in the corner of the room.

Types and sizes of films to be processed — sheet and roll films of all standard sizes up to 37 cm wide for INDX 37/2MW and up to 43cm wide for INDX 43/2MW.

Capacity:

Film size	Cycle 1,5 min, sheets/hour
Film size	37 / 2MW	43 / 2MW
35 x 43 cm	112	137
18 x 43 cm	237	265
11,4 x 43 cm	356	475
8,9 x 25 cm	604	604
1000 cm	67 (85cm/min)	89 (85cm/min)
3000 cm	29 (85cm/min)	38 (85cm/min)

Overall dimensions
• Width—64 cm, Height—77 cm, Length—77 cm
• Weight without baths of INDX 37 / 2MW — 113 kg
• Weight without baths of INDX 43 / 2MW — 127 kg

Power demand — 200-240 V, 50/60 Hz, 16 A.

COLENTA INDX 43/3MW and 43/5MW

High-capacity processor designed for all types of X-ray films for large laboratories.

Types and sizes of films to be processed — sheet and roll films of all standard sizes up to 43 cm wide.
Capacity:

Film size	Cycle 2 min, sheets/hour
Film size	43 / 3MW	43 / 5MW
35 x 43 cm	124	185
18 x 43 cm	240	358
11,4 x 43 cm	430	642
8,9 x 25 cm	547	817
1000 cm	80 (77cm/min)	120 (115cm/min)
3000 cm	34 (77cm/min)	51 (115cm/min)

Overall dimensions
• Width —70 cm, Height —104 cm, Length—80 cm
• Weight without baths of INDX 43 / 3MW — 132 kg
• Weight without baths of INDX 43 / 5MW — 150 kg

SYSTEM OF AUTOMATIC FILM FEEDING

For automatic processors COLENTA INDX 43/3MW and COLENTA INDX 43/5MW

• Maximum film size 43x48cm
• Minimum film size 6x12cm
• The feeder is designed for the simultaneous operation with different standard sizes of the films from 6x12 to 43x48cm.
• Width of film: from 6 cm to 43cm
• Length of film: from 12 cm to 48 cm
• The feeder could be simultaneously charged with films of different sizes into different sections. The dimensions of these sections could be changed so that they use all effective width of automatic processor. Each section accommodates 60 films approximately.
• Maximum capacity of the feeder: 6 sections
(6x12cm, 6x24cm or 6x48cm) by 60 films in each,
totally 360 films
• The possibility to charge manually films of any standard sizes is also provided for.

KODAK INDUSTREX M35

Compact desktop processor designed for all types of X-ray films.
Types and sizes of films to be processed — sheet and roll films of all standard sizes.
Capacity:

Film size	Cycle 2,5 min, sheets/hour
35 x 43 cm	100
18 x 43 cm	212
11,4 x 43 cm	318
8,9 x 25 cm	540
1000 cm	120 (76cm/min)
3000 cm	40 (76cm/min)

Overall dimensions
• Width —67 cm, Height —52 cm, Length—105 cm
• Weight without baths —90 kg
• Occupied area—0,5 m2

Power demand — 200-240 V, 50/60 Hz, 20 A.

» Details

Set of additional tanks for the supply of replenishing solutions of developer and fixing bath

Tanks of capacity by 25 or 34 liters that could be installed onto the processor stand (separate delivery).

Stand for KODAK M35 and COLENTA INDX 900E

This stand provides the reliable support for the processor. It is equipped with sliding tray of stainless steel to install tanks with replenishing solutions.

Lightproof feed tray for KODAK M35 and COLENTA INDX 900E

Additional accessory, saving time and allowing to the operator to work under normal lighting or to leave the dark room just after charging the tray with exposed film.