Portable X-ray units of series MCT

Portable X-ray units of series MCT based on high-reliable cermet tubes are developed to provide the reliability in operation at heaviest duty conditions.  The unit MTC makes r the X-ray examination in field conditions easier in the proper sense of the word.

The series consists of following commercial X-ray units:

MCT -160 (voltage 160kV power 640W focus 0.5mm for radioscopy)
MCT -200 (voltage 200kV power 900 W focus 1.5mm for radiography)
MCT -225 (voltage 225kV power 900 W focus 1.5mm for radiography)

By special request following units could be produced:
MCT -250      (voltage 250kV power 900 W focus 1.5mm for radiography)

Features:

• Reliable, resistant to shocks cermet tube allows the operation of the unit under difficult field conditions.
• Special compact design of the radiator contributed to the reduction of its weight.
• The design of control block and radiator protection allows the unit application in most unfavorable conditions
• winter design, operation at low temperatures up to -40°С
• Constant voltage with isowatt mode
• Automatic control of power limit and tube characteristics
• High output dose
• Program of automatic tube burn-in
• in digital control desk the new frost resisting electro-luminescent graphical display is used. On this display simple, clear text messages in Russian language and exposure diagrams are shown.
• Built-in system of self-diagnostics
• Automatic definition of exposure
• Possibility to work with portable power sources (generators, storage batteries, voltage converters)

The unit consists of X-ray tube set – radiator, control block, power cable to the radiator, cable and signaling flash lamp. The X-ray tube set – radiator is designed as a package, consisted of power unit, high-voltage transformer and multiplier. The voltage converter operates at the high frequency of about 80 kHz, which provides the high efficiency and big depth of scanning. The digital control desk has flash memory, so it can store in memory the big quantity of user’s programs and working protocols. The control desk is equipped with monitor for the control and indication of working modes. The operator calls all parameters through the program number. Every program has own parameters of voltage, amperage, exposure time and focus size. The possibility of entering wrong date is minimized. The program listings could be structured in form of tree; every program could be provided with description that allows the quick selection of necessary scanning mode. When the unit is off, working parameters are stored and automatically called at the restart. The communication with personal computer is maintained which allows the management of all scanning parameters using the software (separate delivery).

During the exposure the integrated system of control and diagnostics follows up more than 15 parameters, which guarantees the high stability and reliability. The real time watch integrated allows following the time intervals between the exposures and carrying out the automatic tube burn-in which prolongs the service life of X-ray tube.

The X-ray tube in portable units is cooled by air. The powerful fan allows the achievement of 100 % cycle of the unit operation. The anode temperature is under permanent control which ensures the constant protection of X-ray tube. The unit is provided with security system, signaling blinking lamp and button of emergency stop with protection against casual restart.

All parts of the unit are protected against splashes. The high-voltage generator and the power block meet the specification of IP54.

The TESTRON products are produced according to the strong safety and quality requirements. The quality system of TESTRON is certified by ISO 9001.
 
For the units MTC a lot of additional accessories and devices are produced. By ordering the additional equipment you make the work with the unit quick and comfortable.

Accessories to be ordered:
- Signaling blinking lamp
- Aluminium transportation case
- Mobile electro-generator
- Set of diaphragms for the beam confinement
- Laser centralizer 
- Holder with 4 degrees of freedom
- Remote control desk
- System for the unit fixation to the pipe
- Trolley for the displacement of the unit around the pipe of arbitrary diameter
- Trolley for the displacement of the unit inside the pipe with adjustable height of the radiator
- Magnetic fixation to the pipe

To get more detailed information apply to technical specialists of our company.