Переносные рентгеновские аппараты PXS EVO

EXTRAVOLT-225 / P3000 – is one-pole, cable X-ray unit of constant potential which is used in the radiography of plastics, composites, ceramics, rubber, light-alloy castings and similar objects.

This high-stable unit of high power capacity was developed for the joint use with cermet X-ray tubes of the company Thales Electron Devices (France). This unit is recommended for the use in high-quality radiography on the X-ray film or reusable phosphorous plates.

Technical characteristics:

Maximum voltage of the tube: 225 kV
Maximum anode current of the tube: 20 mA
Maximum power on the anode of the tube: 3000 W
Depth of radiographic inspection in terms of steel: 76 mm*
Recommended X-ray tube: THX225/1030, THX225/1055
High voltage adjustment range: 10...225 kV with pitch of 0.1 kV
Tube current adjustment range: 0.5...20 mA with pitch of 0.1 mA
Accuracy of output parameters setting: ± 1.0% for amperage; ± 1.5% for voltage
Stability / Repeatability: ±0.1% / ±0.01% at constant temperature
Exposure time (pitch of 0,1 min): 0.1 ... 99,9 minutes or continuously
Length of high-voltage cable: 7 m (standard), up to 100 m (by request)
Flow meter of cooling liquid as a set of cooling system

Voltage: 380V 50/60Hz
Working cycle: 100% 24 hours a day at the temperature of up to 40º С
Working temperature:
-20ºС…40ºС (antifreeze-air cooling)
+2ºС…75ºС (antifreeze-water cooling)
Humidity: up to 90% without moisture condensation
Storage conditions: -25ºС…75ºС, humidity up to 95% without condensation
Maximum power consumption: 4.5 kW
Overall dimensions of generator: 980x350x455 mm
Generator weight: 120kg

* The radiographic inspection depth in terms of steel is given for following test conditions:
FOSFOMATIC-35, distance 700mm, 225 kV, 3000W, 1st class of sensitivity as per GOST 7512-82.
At the operation in the mode of high dose sensitivity the radiographic inspection of big-thickness steels is possible.

Nomographic chart for iron (Fe)
Distance to the object 700mm
Film class KODAK AA400, FOMA R7, AGFA D7
Lead shield 0,02 mm
Radiographic inspection until the achievement of density 2.0D.

Nomographic chart for iron (Fe)
Distance to the object 700мм
FOSFOMATIC-35 (Flex HR)
Lead shield 0,02 mm
Radiographic inspection as per 1st class of sensitivity in accordance with GOST 7512-82

Data could be changed without notification

Block-diagram of the unit EXTRAVOLT-225.

References to the additional information:
Specification on EXTRAVOLT -225 in PDF
Sanitary and epidemiological conclusion on the unit EXTRAVOLT -225
Cermet tubes, produced by Thales Electron Devices
Description of the unit EXTRAVOLT -225
Criteria for selection of stationary X-ray units

On the pictures:
Экспозиция мА х мин – Exposure mA x min
Радиационная толщина мм – Radiation thickness, mm
Силовой блок – Power unit
Высоковольтный генератор – high-voltage generator
Рентгеновская трубка – X-ray tube
Блок управления – Control unit
Датчик протока – flow meter
Высоковольтный кабель – High-voltage cable
Низковольтный кабель - Low-voltage cable
Водяной шланг – Water hose